PLASMA CUTTING PRICING
ALL ORDERS: $100 minimum. May
include set-up and loading (not shipping).
STANDARD LEAD TIME: 5 business
SET-UP (CAD): $25 minimum*
TABLE LOADING FEE: $20.00.
Applies to any material 'blank' over 70 lbs
Maximum Capacity: 1/2 inch thick steel, 1/4 thick aluminum. 800 lbs
area 59 X 96. Table capacity 60 X 144
PLASMA CUTTING: Less than 1 HR: $4.45/minute. Over 1 HR:
$4.05/minute. Over 2 hours $3.65/minute. Over 2.5 hours
$3.45/minute. Over 3 hours $3.25/minute.
CUT SPEEDS: Cutting speeds vary from 12 inches per minute
up to 100+ inches per minute depending on the thickness and type of
CREATIVE ARTWORK: $65.00/hr. 1 HR minimum**
* CAD applies to mechanical drawings (drafting).
Minimum $25 per part number if we need to generate CAD drawings.
This fee may be waived if "cut-ready" .dxf format CAD drawings are
** CREATIVE ARTWORK refers to non-mechanical
commissioned drawings/metal art
NOTE: Cut time on small jobs will be
rounded up to the nearest minute
Click here to send us an email
PHOTO GALLERY DXF CNC CUTTING FILES ONLINE STORE
MyPlasmaCutting.com by Fred Nelson Fabrication
All rights reserved.